melabs Serial LCD Module 16x2
	Quantity in Basket: None Code: SLCD162 Price: $54.95 Volume Pricing: Quantity Price Each 1-9 $54.95 10-24 $49.45 25+ $43.96 Shipping Weight: 0.11 pounds IN STOCK RoHS Compliant: YES
	Quantity:
Download Documentation 2 lines of 16 characters each. The melabs Serial LCD (SLCD) can display serial data from either asynchronous RS232-style or synchronous I2C input. A range of baud rates from 2400 to 57,600 are available and the serial data is buffered so that no delay is necessary when transmitting data to the SLCD. The display includes an LED backlight with variable brightness. The serial LCD board is also available separately for use with other displays that utilize a Hitachi HD44780 or equivalent controller IC. Software-controlled, variable backlight (Off to Full Brightness in 256 steps). Asynchronous serial supported at baud rates of  2400, 9600, 19200, and a blistering 57600. (jumper selectable) Jumper-selectable input inversion for use with either True Mode or Inverted Mode Serial.  Connect directly to a PC serial port or to an output pin on a  microcontroller. Compatible with both RS-232 (+/- 12V) and TTL (0-5V) levels. Synchronous serial I2 C input up to 400K bps. Change I2C slave address via jumpers or with a software command. 80-character buffered communication. User-programmable boot screen memory allows a custom message to be displayed on power up. Use standard commands compatible with Hitachi HD44780 or our easy-to-understand special protocol to control the display Built-in special functions include scroll up, scroll down, set backlight, select line, display bargraph, cursor appearance, change I2C address, save/recall strings. Onboard non-volatile memory allows you to save custom messages and then recall/display them with a short command. Fast bargraph displays (up to the full width of the display) can be anchored on the left side or right side.   Fast enough to display stereo audio levels! 5-volt operation with less than 4mA current consumption (backlight off) 2-line display PCB (outside edge) measures 80mm wide and 36mm high