****Email support@melabs.com for all technical questions.*****
ME Labs, Inc.
719-520-5323
We ship worldwide.
Home Products Support Contact
Search Products:
Sign In

 New Products
 D-Stick
 PICBASIC PRO Compiler
 PBP3 Upgrades
 Products that Teach
 Other Software
 Development Systems
 Device Programmers
 Programming Adapters
 Experimenter Boards
 Prototyping Boards
 Hardware Components
    Microcontrollers
    Display Modules
    Cables and Adapters
    Power
    Electronic Components
 Specialized Products
 Discontinued Products

Subscribe to our mailing list

Products > Hardware Components > Display Modules > melabs Serial LCD Module 20x4

melabs Serial LCD Module 20x4
 
melabs Serial LCD Module 20x4 Quantity in Basket: None
Code: SLCD204
Price: $49.95
Volume Pricing:
Quantity Price Each
1-9$49.95
10-24$44.95
25+$39.96
Shipping Weight: 0.19 pounds
IN STOCK
RoHS Compliant: YES
 
 
Quantity:
 

Download Documentation

4 lines of 20 characters each.

The melabs Serial LCD (SLCD) can display serial data from either asynchronous RS232-style or synchronous I2C input. A range of baud rates from 2400 to 57,600 are available and the serial data is buffered so that no delay is necessary when transmitting data to the SLCD.

The display includes an LED backlight with variable brightness. The serial LCD board is also available separately for use with other displays that utilize a Hitachi HD44780 or equivalent controller IC.

  • Software-controlled, variable backlight (Off to Full Brightness in 256 steps).

  • Asynchronous serial supported at baud rates of  2400, 9600, 19200, and a blistering 57600. (jumper selectable)

  • Jumper-selectable input inversion for use with either True Mode or Inverted Mode Serial.  Connect directly to a PC serial port or to an output pin on a  microcontroller.

  • Compatible with both RS-232 (+/- 12V) and TTL (0-5V) levels.

  • Synchronous serial I2 C input up to 400K bps.

  • Change I2C slave address via jumpers or with a software command.

  • 80-character buffered communication.

  • User-programmable boot screen memory allows a custom message to be displayed on power up.

  • Use standard commands compatible with Hitachi HD44780 or our easy-to-understand special protocol to control the display

  • Built-in special functions include scroll up, scroll down, set backlight, select line, display bargraph, cursor appearance, change I2C address, save/recall strings.

  • Onboard non-volatile memory allows you to save custom messages and then recall/display them with a short command.

  • Fast bargraph displays (up to the full width of the display) can be anchored on the left side or right side.   Fast enough to display stereo audio levels!

  • 5-volt operation with less than 4mA current consumption (backlight off)

  • 4-line display PCB (outside edge) measures 98mm wide and 60mm high




Copyright 2022
ME Labs, Inc.
PO Box 8250
Asheville NC 28814
(719) 520-5323
(719) 520-1867 fax
email: support@melabs.com
Home | Products | Support | Resources
Purchase | Contact

PIC, PICmicro, dsPIC, and MPLAB are registered trademarks of Microchip Technology Inc. in the USA and other countries.  PICBASIC, PICBASIC PRO, PICPROTO, and EPIC are trademarks of Microchip Technology Inc. in the USA and other countries.   BASIC Stamp is a trademark of Parallax, Inc.